All About Louvered Windows | Advantages of Louver Windows | Disadvantages of Louver Windows | Applications of Louver Windows

All About Louvered Windows

Introduction Louvered Windows

When building a new house or renovating an old one, choosing the right windows for the job can be the difference between success and failure.

If you put the appropriate window in the appropriate location, you can simultaneously obtain natural light, optimal ventilation, and energy conservation.

The appealing appearance of louver windows and their potential for enhancing fresh air circulation throughout the home have contributed to their widespread adoption.

There is a lot of similarity between louvered doors and louvered windows. A window with flat, sloping pieces of wood, metal, or glass across it is called a louver, designed to let light and air in a while, preventing rain from entering.

The purpose of those windows is solely to allow air circulation; they do not offer any form of view of the outside world. The louver windows not only ensure that the views outside are unimpeded, but they also ensure enough ventilation.

These shutters come with several grooved louver options, in addition to the top and bottom rails, and both can be used with the shutters. The frames of these windows may have either fixed or movable louvers and may be constructed of wood, glass, or metal.

For the most efficient and cost-effective construction, lavatory blades and louvers are often tilted at a 45-degree angle to the vertical form.

Rainwater collects on the exterior of the louver and eventually runs off. Some Venetian shutters feature a louver that may be adjusted in both the open and closed positions.

This magnificent set of window shutters will look wonderful in any house because of their classic design and clean lines.

This type of window is frequently the most suitable alternative in areas such as restrooms, powder rooms, and other rooms where privacy is of the utmost importance.

Louvered Windows

Louvered Windows

A jalousie window, also known as a louvered window, can have its louvers made of glass, acrylic, or wood and framed in any material (Australia, New Zealand, the Pacific Islands, Southeast Asia, and the United Kingdom).

The louvers can control the flow of air by being tilted open and closed in synchrony using a crank. This allows the louvers to be used.

The word “jealousy” comes from the French word “jalousie,” which means “envy.” In the 18th century, the French language was the first to use the Italian word geloso, which translates to “jealous” or “screen” in the sense of concealing something from public view.

It is stated that jalousie windows, which include slatted louvers, can shield the interior of a home from the prying eyes of jealous neighbors. The word “jalousie” originates in the middle of the 18th century and has nothing to do with the French word “jealousy.”

Also Read: All About Bay Windows | What Is Bay Window | Uses of Bay Windows | Types of Bay Windows | Size of Bay Windows

Advantages of Louver Windows

Advantages of Louver Windows

There are various advantages of lovered windows which are as follows

  • Even when they are closed, louver windows allow a great deal of natural light and fresh air into a room.
  • These windows allow for adequate privacy and protect the interior from the damaging effects of direct sunlight and glare. All of this is accomplished without compromising airflow.
  • One can open a louver window nearly to its full width. Because of this, there is significant air movement in both directions.
  • It does not take a lot of effort to clean louver windows because they do not have a lot of surface area.

Modulating the angle of the blades allows for control over the airflow produced by the fan. Because of its size, a significant amount of natural ventilation is available.

Because it uses the airflow that is already present, the louver reduces the amount of money spent on heating and cooling.

Thanks to the customizable louvers, you can control how much of the window is open at any time. There is no requirement that you walk outdoors to clean it.

If you have privacy glass, wood, or aluminum blades on your windows, you can slightly open the window without sacrificing any of your personal space.

As a consequence of this, louver windows may accommodate a wide range of architectural preferences. It is available in a wide variety of looks and patterns.

Disadvantages of Louver Windows

Disadvantages of Louver Windows

There are also some disadvantages of louver windows which are as follows

  • The louver windows allow chilly air to circulate, using them as restrooms during the winter is not the ideal choice.
  • If you are worried about insects, you should make sure that the seals are as strong as they can be; yet, there is always a possibility that they will get in.
  • In this type of window, there are some noise may get through, depending on how it’s constructed. On the other hand, the greater the number of moving components, the greater the amount of maintenance that is necessary.

Also Read: All About Gable Windows | Origin of Gables | Advantages of Gable | Gable End Windows | How Does Gable End Windows Work

Applications of Louver Windows

Applications of Louver Windows

Natural ventilation is increased to its full potential when using Jalousie windows since they permit air to move freely across their whole surface.

Because they have never been constructed of anything other than wooden slats or glass panes, they are ideal for locations that experience relatively mild winters.

They were produced in such large quantities that by the middle of the 20th century, you could find them in virtually every home across the Caribbean and South American continents. In regions with cooler temperatures, the most common locations for heaters were porches and sunrooms.

In the 1950s and 1960s, casement windows were phased out in mobile homes and replaced by sliding sash windows, which have been increasingly popular.

It is possible to use contemporary jalousie windows in high-performance architectural windows and in buildings that have won awards for excellence in home architecture and sustainable living. These kinds of buildings have been referred to as “green” homes.

Jalousie windows have evolved into both a decorative and functional component throughout history, serving as a technical mechanism for regulating temperature and airflow. They are also being utilized an increasing amount in commercial applications.

Alternatives to Louvered Windows

Alternatives to Louvered Windows

Various window designs can be used to achieve the look of a mid-century home, including jalousies, a common choice for homes built during that period. Sliding glass doors are a great choice for modern homes since they provide an unobstructed view of the surroundings.

In addition, you can choose sliding or casement windows for your home. Both of these windows are suitable for installation in mid-century homes without detracting from the defining characteristics of the period.

Jalousie windows are widely regarded as having a significant advantage over other types of windows. This is because, in contrast to other types of windows, jalousie windows can be left partially open during heavy rains to maintain the desired level of ventilation regardless of the weather. Other types of windows cannot do this.

This is a key factor contributing to the widespread acceptance of jalousie windows. Jalousie windows were tested in tropical environments in the year 1960 to determine whether or not they could keep the rain out while still allowing air to circulate through them.

The results of these tests revealed that Jalousie Windows was successful in accomplishing both of these goals. Because air and precipitation tend to move in the same direction, it can be difficult to distinguish between them while preserving an acceptable ventilation level.

Jalousie windows, in addition to this, offer several other potential downsides that should be considered. The traditional kind of jalousie windows has poor overall resistance to water infiltration, and the slats can be easily and inconspicuously removed from the window.

However, an alternative type of jalousie window does not have these issues. They do not establish a secure barrier to prevent leaks in the air-conditioning system, which is another way they fail to prevent water from entering the system.

It is also susceptible to corrosion in moist environments, which can damage the mechanism that moves the windows in the form of broken or missing cranks. This can be an expensive repair.

The incapacity of jalousie windows to prevent the admission of both people and insects is the fundamental reason why many Floridians strongly dislike this style of window.

The current producers of jalousie windows have addressed these issues in their designs, so they should not be a worry. A significant number of companies declare that their wares are not only less hazardous but also more efficient than those offered by their rivals.

Louvre Windows: Is It Worth the Price?

Louvre Windows Is It Worth the Price

When it comes to undertakings about home repair, Louvre windows are frequently overlooked. These are resurgent since it’s so simple to modify them to match your house’s aesthetic.

Attractive and Well-Liked by the Public

Attractive and Well-Liked by the Public

The visual attractiveness of louver windows has contributed to their widespread adoption. It is entirely up to you to decide how you would like to style them and how you would like to embellish them. In addition, they are trendy right now, which means that your windows will look fashionable.

Improved Energy Use

Improved Energy Use

Louver windows can help homeowners save money on their monthly electricity costs by lowering the energy your home requires. Because they are so effective at cooling and ventilating the air, they can be used in places like laundries and bathrooms instead of fans.

This can be to everyone’s benefit. Lifestyle Windows can assist you in accomplishing your goal of increasing your home’s energy efficiency.

Great Ventilation


Ventilation is extremely important when selecting windows for a Sunshine Coast home. Ventilation achieved via Louvre windows is exceptionally efficient and enables steady air circulation throughout your home. This can help lower the relative humidity inside your home and keep it at a comfortable temperature.

Enhanced Security

Enhanced Security

You can modify your louver windows to achieve this if your interiors have increased privacy and reduced visibility. Not only that but they can also be arranged in such a way as to ensure that privacy is preserved even when the windows are tilted at an angle.

Also Read: All About Metal Windows | Different Types of Steel Windows | Steel Windows Features | What Are the Benefits of Steel and Iron Windows

Increase the Amount of Natural Light in Your Home

Increase the Amount of Natural Light in Your Home

If the rooms in your home are too dim because the windows are in an awkward position, you might want to consider installing Louvre windows.

They let you control the quantity of light that comes into your home by being tinted or colored, which also gives you the ability to produce more natural light.

Replacing Louvered Windows

Replacing Louvered Windows

Window louvers called jalousie windows are common in older houses. Jalousie windows resemble shutters made of glass, but instead of opening upward, they use a crank to push the window outward.

When newer, more energy-efficient windows became available, the popularity of jalousie windows in residences in hotter regions began to wane.

These Windows’ Strong Glass, Nevertheless Has the Potential to Chip and Break

These Windows' Strong Glass Nevertheless Has the Potential to Chip and Break

Put up some rope to block off the area so no one can accidentally hurt themselves. Because of the jalousie window glass’s increased depth, a special order may be necessary to acquire it.

The floor should be swept clean of any shattered pieces, which should then be placed in the paper bag. While wearing gloves, hammer any remaining broken pieces into the picture’s frame, and then place the pieces in a bag after you have finished.

It’s High Time That We Got Rid of That Glass!

It's High Time That We Got Rid of That Glass!

Make the shape of an “X” with the masking tape before removing the cracked or chipped glass from the frame. This will prevent the glass from shattering any further than it already has. The panes of glass in jalousie windows are held in place by mechanisms that consist of either set screws or metal tabs.

Hold the glass in one hand while using the screwdriver to loosen the set screws on the window. This will prevent the glass from shattering. After that, take the time to remove the glass from the window carefully.

It is strongly suggested that you enlist the help of a companion if you do a task that requires the use of a set screw system, such as removing glass from the system.

These screws will be necessary for you to use if it becomes necessary to replace the damaged glass. You will need to remove the window screen from the inside of a metal-tabbed jalousie window to obtain access to the window itself.

Grab both panes of glass and pull them apart simultaneously when the window is about a third of the way open. When the glass is removed from the system’s exterior, it exposes the tabs to the risk of damage. Metal tab systems are susceptible to this risk.

Also Read: All About Corner Windows | Are Corner Windows Expensive | Measurements of a Corner Window

A Fresh Glass Has Just Been Put in Place

A Fresh Glass Has Just Been Put in Place

Before installing the glass, you must ensure that the metal casings have been thoroughly cleaned of any debris or corrosion and that any damaged window seals have been removed.

You should also make sure that any damaged window seals have been removed. It is important to remember to replace the screws in any setscrew systems after you have completed the process of installing the glass.

If you use a metal tab system, check that the slots on the glass are aligned before sliding the glass into the casings. This is only necessary if you are using the system. First, reinstall the window screen and apply adhesive to the replacement window seal.

It is unnecessary to replace your jalousie window entirely to restore its lovely original appearance. All that is required is some minor repair work. When working with glass, it is necessary to observe the utmost safety.

Frequently Asked Questions:

Jalousie Window Price

Replacement jalousie windows cost on average between $175 and $375 per window to have installed. These windows are considered to be on the lower end of the pricing spectrum for home replacement windows.

Best Windows for Hot Humid Climates

Casement windows are great replacement windows for places with high humidity and moisture levels. The monodirectional opening is optimized to balance out temperature imbalances, preventing condensation issues from occurring.

Types of Louvers

There are four basic types of industrial louvers: stationary, adjustable, combination, and air measuring. Stationary louvers are equipped with angled or airfoil-style blades that may provide weather protection and sound attenuation. Adjustable louvers with airfoil blades are also commonly available.

Louvers Architecture

louver, also spelled Louvre, arrangement of parallel, horizontal blades, slats, laths, slips of glass, wood, or other material designed to regulate airflow or light penetration. Louvers are often used in windows or doors in order to allow air or light in while keeping sunshine or moisture out.

Are Louver Windows Safe?

Louver or jalousie windows: Louver windows are especially vulnerable to intruders because the glass panes can be easily lifted out of their brackets from the outside. A simple way to increase the security of this type of window is to epoxy the panes to the brackets.

Are Louvre Windows Airtight?

Altair Louvre Windows provide tight sealing due to: The living hinge design that resists water and air penetration between the clips and the channels. An over center locking mechanism which applies strong locking pressure to blades when fully closed.

Jalousie Vs Louver

The big difference between these two is that louvers are fixed slats whereas jalousie windows have blades that are adjustable in parallel with each other. So if you’re looking at other window replacement or installation websites in Oahu, you may see them use louver and jalousie interchangeably since it is commonplace.

Are Louvre Windows Secure?

Louver or jalousie windows: Louver windows are especially vulnerable to intruders because the glass panes can be easily lifted out of their brackets from the outside. A simple way to increase the security of this type of window is to epoxy the panes to the brackets.

Benefits of Louvered Windows for Ventilation

One of the main benefits of using Louvre windows for natural ventilation is that they can reduce the need for mechanical cooling systems, such as air conditioners. By allowing fresh air to circulate freely, Louvre windows can help maintain a comfortable temperature inside the building, even on hot days.

Louvered Windows Installation Cost in the USA

The cost of installing louvered windows in the USA can vary depending on several factors, including the size of the windows, the materials used, the complexity of the installation, and the location of the project. It’s always a good idea to obtain quotes from multiple contractors to get an accurate estimate for your specific requirements.

Best Materials for Louvered Windows

Aluminium is the most popular choice of material for outdoor louver systems and it’s not hard to see why!

Energy-Efficient Louvered Windows for Homes

Energy-efficient louvered windows can be a great choice for homes as they offer several benefits such as improved ventilation, natural light control, and energy savings. Here are a few factors to consider when selecting energy-efficient louvered windows for your home:

  1. Material: Opt for windows made from energy-efficient materials such as vinyl, fiberglass, or wood that are designed to provide insulation and reduce heat transfer.
  2. Low-E Glass: Look for louvered windows with Low-E (low-emissivity) glass coatings. These coatings help to reflect heat and UV rays, keeping your home cooler in the summer and preventing heat loss in the winter.
  3. Insulation: Ensure that the louvered windows you choose have proper insulation features, such as weatherstripping and thermal breaks, to minimize air leakage and improve energy efficiency.
  4. Energy Star Certification: Look for louvered windows that are Energy Star certified. This designation indicates that the windows meet specific energy efficiency standards set by the U.S. Environmental Protection Agency (EPA) and the Department of Energy (DOE).
  5. Motorized Operation: Consider louvered windows with motorized or automated controls. This allows for convenient operation and precise control over airflow, which can enhance energy efficiency by optimizing ventilation based on outdoor conditions.

Custom Louvered Windows Designs and Options

Custom louvered windows offer a variety of designs and options to suit your specific needs and preferences. Here are some common customization options available for louvered windows:

  1. Materials: You can choose from different materials for your louvered windows, including wood, vinyl, aluminum, or fiberglass. Each material has its own characteristics in terms of aesthetics, durability, and maintenance requirements.
  2. Size and Shape: Custom louvered windows can be tailored to fit the exact size and shape you desire. Whether you need standard rectangular windows or unique shapes like arched or round louvered windows, customization allows you to achieve the desired look and functionality.
  3. Louver Style and Orientation: Louvers, or slats, can be customized in terms of their size, shape, and orientation. You can choose from various louver profiles such as flat, elliptical, or angled, and adjust the slat angle to control the amount of light and airflow. Some designs even offer movable or adjustable louvers for added flexibility.
  4. Glass Options: Custom louvered windows offer different glass options to meet your requirements. You can choose from clear glass, tinted glass, frosted glass, or even double or triple-pane insulated glass for enhanced energy efficiency and soundproofing.
  5. Hardware and Accessories: Personalize your louvered windows with a range of hardware and accessories. This includes handles, locks, hinges, and various finishes such as brushed nickel, bronze, or brass to match your interior or exterior style.

Disadvantages of Louvre Windows

  • Not great in winter as they can allow cold air to travel through the room so for bathrooms are not always ideal.
  • KEEP IT TIGHT if you are worried about insects you want them to be tight as can be but always the risk.
  • Can allow noise to come through depending on how it is manufactured.

Alternatives to Jalousie Windows

If you’re considering alternatives to jalousie windows, there are several options available that offer different benefits and features. Here are some popular alternatives to jalousie windows:

  1. Casement Windows: Casement windows are hinged on one side and open outward. They provide excellent ventilation and a wide, unobstructed view when fully opened. Casement windows typically have a single pane of glass and can be energy-efficient when equipped with low-E glass and proper sealing.
  2. Double-Hung Windows: Double-hung windows have two operable sashes that slide vertically within the frame. They offer versatility, allowing you to open the top sash, bottom sash, or both for ventilation. Double-hung windows are common in traditional and historic homes and are available in various styles and materials.
  3. Awning Windows: Awning windows are hinged at the top and open outward from the bottom, creating an awning-like effect. They are ideal for providing ventilation even during light rain as the window can remain open. Awning windows are commonly used in bathrooms and basements.
  4. Sliding Windows: Sliding windows feature one or more panels that slide horizontally along a track. They are easy to operate and provide a contemporary look. Sliding windows can be a good alternative if you prefer a clean, unobstructed view and easy operation.
  5. Picture Windows: Picture windows are fixed windows that do not open. They are designed to maximize natural light and provide expansive views. While they don’t offer ventilation, picture windows are popular for their aesthetic appeal and energy efficiency.

Louvre Windows Pros and Cons

Louvre windows, also known as louvered windows, offer a unique set of advantages and disadvantages. Here are some of the pros and cons of louvre windows:


  1. Ventilation: Louvre windows are known for their excellent ventilation capabilities. The adjustable slats allow you to control the amount and direction of airflow, making them ideal for maximizing natural ventilation and fresh air circulation.
  2. Natural Light: Louvre windows allow abundant natural light to enter the room when the slats are open, brightening up the space and reducing the need for artificial lighting during the day.
  3. Privacy and Security: When the slats are closed, louvre windows offer privacy by obstructing the view from outside while still allowing light to filter through. Additionally, some louvre windows can be equipped with security features such as reinforced frames and locks.


  1. Weather and Insulation: One of the main drawbacks of louvre windows is their susceptibility to weather conditions. When the slats are open, louvre windows may allow rain, wind, and drafts to enter the room, potentially affecting comfort and energy efficiency. While some louvre windows offer improved insulation features, they may not be as effective as other window types in extreme weather conditions.
  2. Limited Sealing: The adjustable slats in louvre windows, while providing ventilation, may also present challenges in achieving a completely airtight seal. This can result in potential air leakage and decreased energy efficiency compared to other window types.
  3. Noise and Privacy: Louvre windows may not provide the same level of sound insulation as windows with a single pane of glass. The multiple slats can allow more outside noise to penetrate the room. Additionally, while louvre windows offer privacy when the slats are closed, they may not provide as much privacy as windows with obscured or frosted glass.

Disadvantages of Louvered Doors

The main disadvantage is maintenance. There are more ridges and hard to reach places on a louvered door than a flat panel door and this can make cleaning challenging. Certain bendable feather dusters make daily cleaning much easier but when it’s time for a deep clean be prepared to spend extra time.

Jalousie Windows Advantages and Disadvantages

Pros: Most popular in warm climes, jalousies let light and fresh air in while keeping rain out; good for bathroom ventilation; low cost. Cons: Slats are easy to pry open, decreasing security; drafty; hard to clean.

What Are Louvered Windows Called?

jalousie window (UK: /ˈdʒælʊziː/, US: /ˈdʒæləsiː/) or louvered window (Australia, New Zealand, Pacific Islands, Southeast Asia, United Kingdom) is a window composed of parallel glass, acrylic, or wooden louvres set in a frame.

Vertical Louvers Advantages

Vertical louvers are one of the most effective systems controlling daylight, and reduce the amount of glare inside the building in addition to controlling daylight.

Explain Double Hung Window

What is a Double-Hung Window? A double-hung window, also commonly referred to as a double-sash window, is a type of window that has two operable sashes that slide up and down. There are two main operable parts of a double-hung window — the top sash and the bottom sash. They are both able to open to provide ventilation.

Like this post? Share it with your friends!

Suggested Read –

Leave a Reply

Your email address will not be published. Required fields are marked *