All About Fix Windows Upgrade Error 0x800700b7- 0x2000A

All About Fix Windows Upgrade Error 0x800700b7- 0x2000A

Windows upgrades are an essential part of maintaining a computer’s performance and keeping up with the latest features. However, these upgrades can sometimes encounter errors, and one of the most common ones is the 0x800700b7- 0x2000A error. This error can cause frustration and disrupt your computer usage, but luckily, there are ways to fix it. In this article, we will explore everything you need to know about the fix for Windows upgrade error 0x800700b7- 0x2000A. By the end, you will have a clear understanding of what causes this error and how to overcome it, ensuring a smooth and successful Windows upgrade process.

How to Fix Windows Upgrade Error 0x800700b7- 0x2000A

If you’re trying to upgrade your Windows operating system and receive the error code 0x800700b7 – 0x2000A, don’t worry – you’re not alone. This error can occur for various reasons, but luckily there are a few solutions you can try to fix it. In this blog post, we’ll discuss some troubleshooting steps you can take to resolve the Windows upgrade error 0x800700b7 – 0x2000A.

What is Windows Upgrade Error 0x800700b7 – 0x2000A?

This error code indicates that the Windows upgrade process has failed due to a problem with the installation media. This can occur if the Windows installation files are corrupt, incomplete, or not compatible with your system. It is a common error that can happen when upgrading from an older version of Windows to a newer one.

How to Fix Windows Upgrade Error 0x800700b7 – 0x2000A

Here are some solutions you can try to fix the Windows upgrade error 0x800700b7 – 0x2000A:

Solution 1: Restart Your Computer and Retry the Installation

Sometimes, a simple restart can solve many problems. Close all programs and restart your computer. Once it boots up, try to do the upgrade installation again. If the error persists, move on to the next solution.

Solution 2: Check for Updates and Install Them

Make sure your computer is up to date with the latest Windows updates. Sometimes, errors can occur when installing a new version of Windows if the current version is not fully updated. To check for updates:

1. Press the Windows key + I to open the Settings app.

2. Click on Update & Security.

3. Click on Windows Update in the left-hand menu.

4. Click on Check for updates.

If there are any updates available, click on Install now. After the updates have been installed, restart your computer and try to do the upgrade installation again.

Solution 3: Run Windows Update Troubleshooter

Windows has a built-in troubleshooter that can help fix common update-related issues. To run the Windows Update Troubleshooter:

1. Press the Windows key + I to open the Settings app.

2. Click on Update & Security.

3. Click on Troubleshoot in the left-hand menu.

4. Scroll down and click on Windows Update.

5. Click on Run the troubleshooter and follow the on-screen instructions.

Once the troubleshooter has finished, restart your computer and try to do the upgrade installation again.

Solution 4: Use the Media Creation Tool to Create a New Installation Media

If the above solutions did not work, you can try using the Media Creation Tool to create a new installation media. This tool will download the latest version of Windows and create an installation USB or DVD. To use the Media Creation Tool:

1. Go to the Microsoft website and search for Media Creation Tool.

2. Click on Download tool now and save the file to your computer.

3. Double-click on the downloaded file to run the tool.

4. Accept the License terms and click on Next.

5. Select the option to Create installation media (USB flash drive, DVD, or ISO file) for another PC and click on Next.

6. Choose your preferred language, architecture, and edition of Windows and click on Next.

7. Select the USB flash drive option and follow the on

1. Run the Windows Update Troubleshooter

Windows Update is an essential tool for keeping your computer up-to-date with the latest security patches, bug fixes, and feature updates from Microsoft. However, sometimes the Windows Update process can encounter issues that prevent it from completing successfully. In such cases, running the Windows Update Troubleshooter can help troubleshoot and fix common Windows Update problems.

Here’s how to run the Windows Update Troubleshooter:

Step 1: Open the Settings app on your computer by clicking on the Start menu and then clicking on the gear icon.

Step 2: In the Settings app, click on Updates & Security.

Step 3: Click on Troubleshoot in the left menu.

Step 4: Scroll down and click on Windows Update under the Get up and running section.

Step 5: Click on Run the troubleshooter.

Step 6: The troubleshooter will now scan your system for any issues related to Windows Update and attempt to fix them. This process may take a few minutes.

Step 7: Once the troubleshooter has completed its scan, it will display the result. If it has found any issues, it will provide a description and an option to fix them. Click on Apply this fix to let the troubleshooter attempt to fix the problem.

Step 8: If the troubleshooter was able to fix the issue, it will display a message stating that the problem has been resolved. Click on Close to finish.

Step 9: If the troubleshooter was not able to fix the issue, it may display a message stating that the problem was not resolved. In such cases, you can try running the troubleshooter again or try the other solutions suggested by the troubleshooter.

Step 10: Once you have finished troubleshooting, click on Close to exit the troubleshooter.

Running the Windows Update Troubleshooter is a simple and effective way to troubleshoot and fix common Windows Update problems. If the troubleshooter was able to fix the issue, you should be able to update your computer without any further issues. However, if the issue persists, you may need to try other solutions such as resetting Windows Update components or performing a clean boot.

2. Reset Every Windows Update Component

2. Reset Every Windows Update Component

Windows updates are crucial for keeping your computer secure and running smoothly. However, sometimes these updates can cause issues and disrupt your system. If you are experiencing problems with Windows updates, it may be necessary to reset every Windows update component. In this blog post, we will explain the steps to reset every Windows update component and fix any issues you may be facing.

1. Run the Windows Update Troubleshooter

The first step in resetting every Windows update component is to run the built-in Windows Update Troubleshooter. This tool is designed to automatically detect and fix any issues that are preventing Windows updates from installing. To run the Windows Update Troubleshooter, follow these steps:

– Press the Windows key + I on your keyboard to open the Settings app
– Select “Update & Security”
– Click on “Troubleshoot”
– Scroll down and click on “Windows Update”
– Click on “Run the troubleshooter” and follow the prompts

If the troubleshooter detects any problems, it will attempt to fix them automatically. If the issue persists, move on to the next step.

2. Stop Windows Update Services

Sometimes, Windows Update may be stuck or frozen. In such cases, stopping the Windows Update services and restarting them can help resolve the issue. Here’s how to do it:

– Press the Windows key + R on your keyboard to open the Run dialogue box
– Type “services.msc” and press Enter
– In the Services window, find “Windows Update” and double-click on it
– In the General tab, click on “Stop” and then click “OK”
– Find “Background Intelligent Transfer Service (BITS)” and double-click on it
– In the General tab, click on “Stop” and then click “OK”

Close the Services window and move on to the next step.

3. Rename the Windows Update Folder

After you have stopped the Windows Update services, the next step is to rename the Windows Update folder. This will essentially reset the Windows Update components and force them to start fresh. Follow these steps to rename the Windows Update folder:

– Open File Explorer and navigate to “C:\Windows”
– Find the “SoftwareDistribution” folder and rename it to “SoftwareDistribution.old”
– If prompted for administrator permission, click on “Continue”
– Next, go back to the “C:\Windows” directory
– Find the “System32” folder and rename it to “Catroot2.old”

By renaming these two folders, you are essentially clearing the Windows Update cache. This cache can sometimes become corrupted and cause issues with the update process.

4. Start Windows Update Services

After renaming the two folders, you will need to start the Windows Update services again. Follow these steps to do so:

– Open the Services window by following the steps outlined in step 2
– Find “Windows Update” and double-click on it
– In the General tab, click on “Start” and then click “OK”
– Find “Background Intelligent Transfer Service (BITS)” and double-click on it
– In the General tab, click on “Start” and then click “OK”

5. Perform a Clean Boot

If the above steps do not help, you can perform a clean boot on your computer. This will help isolate any third-party programs that may be causing conflicts with the Windows Update process. Follow these steps to perform a clean boot:

3. Install Update KB3112343 and KB3112336 (Windows 7 & 8.1 only)

Microsoft regularly releases updates for their Windows operating system to improve its functionality, fix bugs, and enhance security. The latest updates KB3112343 and KB3112336, released in November 2016, aim to provide important improvements and fixes for Windows 7 and 8.1 users. In this blog, we will discuss how to download and install these updates on your computer.

Step 1: Check for Updates

Before installing any updates, it is important to check if your system already has them. To do this, go to the Windows Start menu, click on Control Panel, and select Windows Update. Click on Check for updates button and wait for the scan to complete.

Step 2: Download the updates

If the updates (KB3112343 and KB3112336) are available, they will be listed in the available updates section. Click on the updates to select them and then click on the Install button. Wait for the updates to download.

Step 3: Install the Updates

After the download is complete, the updates will automatically start installing. You may need to restart your computer to complete the installation process. It is recommended to save your work and close all programs before restarting.

Step 4: Check the Update Status

After restarting your computer, check the update status by going back to the Windows Update page. If the updates were installed successfully, it will show a status of “Update(s) were installed”. If there were any errors or the update failed to install, it will be listed in the update history with an error code. In this case, you may need to troubleshoot the issue or seek help from Microsoft support.

Step 5: Troubleshooting

If the updates fail to install, you can try troubleshooting the issue by going to Control Panel > Troubleshooting > System and Security. Here you will find an option to fix problems with Windows Update. Click on this option and follow the prompts to fix any issues that may be preventing the updates from installing.

Step 6: Manually Download and Install Updates (Optional)

If you are still unable to install the updates, you can try manually downloading and installing them. Go to the Microsoft Download Center website and search for the update by its KB number. Download the appropriate version for your operating system and install it manually.

In conclusion, keeping your Windows operating system up-to-date is crucial for security and performance reasons. Installing updates KB3112343 and KB3112336 for Windows 7 and 8.1 will ensure that your system has the latest improvements and fixes. If you encounter any issues during the installation process, try troubleshooting or manually installing the updates.

4. Run SFC & DISM Scans

If you’re experiencing issues with your computer, such as slow performance or frequent crashes, it could be due to corrupt system files. This can happen due to various reasons, such as malware infections, software bugs, or hardware failures.

Thankfully, Windows has built-in tools to help you scan and repair any corrupted system files. These tools are called System File Checker (SFC) and Deployment Image Servicing and Management (DISM) scans. In this blog post, we’ll discuss what these scans are and how to run them on your Windows computer.

What is SFC Scan?

SFC stands for System File Checker. It is a built-in Windows tool that checks for corrupted or missing system files and replaces them with a cached copy located in a compressed folder at %WinDir%\System32\dllcache. This scan is useful when you’re experiencing issues with Windows components or applications.

How to Run an SFC Scan:

1. Open the Start menu and type “cmd” in the search bar.

2. Right-click on Command Prompt and select “Run as administrator.”

3. In the Command Prompt window, type “sfc /scannow” and hit Enter.

4. The scan will now begin and may take some time to complete. Do not close the Command Prompt window until the scan is finished.

5. If any corrupted or missing files are found, SFC will automatically replace them with the cached copy.

6. Once the scan is completed, you will receive a message stating whether the scan found any errors or not.

7. If the scan found and fixed any errors, restart your computer and check if the issue you were experiencing has been resolved.

What is DISM Scan?

DISM stands for Deployment Image Servicing and Management. It is another built-in Windows tool that can be used to repair corrupt system files. Unlike the SFC scan, DISM scan not only checks for corrupted system files but also repairs any corrupt Windows images.

How to Run a DISM Scan:

1. Open the Start menu and type “cmd” in the search bar.

2. Right-click on Command Prompt and select “Run as administrator.”

3. In the Command Prompt window, type “dism /online /cleanup-image /restorehealth” and hit Enter.

4. The scan will now begin and may take some time to complete. Do not close the Command Prompt window until the scan is finished.

5. If any corrupt or missing files are found, DISM will try to download and replace them from Windows Update. If not, it will use the installation media of your Windows version to replace the files.

6. Once the scan is completed, you will receive a message stating whether the scan found any errors or not.

7. If the scan found and fixed any errors, restart your computer and check if the issue you were experiencing has been resolved.

When to Run SFC and DISM Scans?

You can run these scans whenever you experience any issues with your computer, such as slow performance, crashing, or error messages. It is also recommended to run these scans if you suspect that your computer has been infected with malware, as they can help repair any corrupted system files that may have been affected by the malware.

Final Thoughts

Running SFC and DISM scans are simple yet effective ways to fix issues caused by corrupted system files. It is a good practice to regularly run these scans to keep your computer in good working condition. If the scans do not fix

Conclusion

In conclusion, the Windows upgrade error 0x800700b7- 0x2000A can be a frustrating and time-consuming issue for users. However, with the above-mentioned solutions and tips, it can be successfully resolved. It is important to always keep your system and drivers updated, follow proper installation procedures, and use reliable software tools to fix this error. By taking these precautions, you can ensure a smooth and error-free upgrade process on your Windows operating system. Remember to also seek help from official Microsoft support if the problem persists. With patience and persistence, you can overcome this error and successfully upgrade your Windows system.

Leave a Reply

Your email address will not be published. Required fields are marked *