Windows 11 is the newest operating system from Microsoft, offering users a fresh and modern interface along with a range of new features. One of the most popular and convenient features of this new operating system is the touch gesture support, allowing users to interact with their devices in a more intuitive and efficient way. However, like any technology, touch gestures can also encounter issues that may hinder their functionality. In this article, we will explore the possible reasons and solutions for touch gestures not working in Windows 11, providing a comprehensive guide for users to effectively resolve any problems they may encounter.
Table of Contents
How to Fix Touch Gestures Not Working in Windows 11?
One of the new and exciting features of Windows 11 is the ability to use touch gestures to navigate and interact with the operating system. However, some users may encounter issues where these touch gestures are not working as expected. This can be frustrating, especially if you are used to using touch gestures on previous versions of Windows. In this article, we will discuss how to fix touch gestures not working in Windows 11.
1. Check Touchpad/Trackpad Settings
The first step in troubleshooting touch gestures not working in Windows 11 is to ensure that your touchpad (laptop) or trackpad (desktop) is properly configured. To check and adjust your touchpad/trackpad settings, follow these steps:
1. Go to Settings > Devices > Touchpad.
2. Make sure the “Touchpad” toggle is turned on.
3. Under “Touchpad Sensitivity,” adjust the sensitivity slider to your preferred level.
4. Under “Taps,” make sure the relevant gestures (e.g., Two-finger tap for right-click) are enabled.
5. Under “Scroll and Zoom,” make sure the relevant gestures (e.g., Two-finger scroll) are enabled.
6. Save any changes and restart your computer.
2. Update Your Touchpad/Trackpad Driver
If your touch gestures are still not working after adjusting your touchpad/trackpad settings, it is possible that you have an outdated or corrupted driver. To update your touchpad/trackpad driver, follow these steps:
1. Go to Device Manager.
2. Expand the “Mice and other pointing devices” category.
3. Right-click on your touchpad/trackpad driver and select “Update driver.”
4. Follow the on-screen instructions to update the driver.
5. Restart your computer and check if the touch gestures are now working.
If the update did not fix the issue, try uninstalling and then reinstalling the driver. To do this, follow the same steps as above and select “Uninstall device” instead of “Update driver.” Once uninstalled, restart your computer and the driver should automatically reinstall.
3. Run the Windows Troubleshooter
Windows 11 has a built-in troubleshooter that can help identify and fix common issues with various features, including touch gestures. To run the troubleshooter, follow these steps:
1. Go to Settings > System > Troubleshoot.
2. Under “Find and fix other problems,” click on “Hardware and devices.”
3. Click on “Run the troubleshooter” and follow the on-screen instructions.
4. After the troubleshooter completes its scan, it will provide any recommended fixes. Click on “Apply this fix” if available.
5. Restart your computer and check if the touch gestures are working.
4. Check for Windows Updates
It is always a good idea to keep your Windows 11 operating system up to date to ensure that you have the latest enhancements and bug fixes. To check for and install any available updates, follow these steps:
1. Go to Settings > Windows Update.
2. Click on “Check for updates.”
3. If there are any updates available, click on “Download.”
4. After the update is downloaded, click on “Install” and follow the on-screen instructions.
5. Restart your computer and test if the touch gestures are now working.
5. Check for Third-Party Software Conflicts
If you have recently installed any new software or made changes
1. Enable Touchpad from Windows Settings
Many Windows laptops and notebooks come equipped with a touchpad, a built-in pointing device that can be used as an alternative to a mouse. However, there are times when the touchpad may not be working properly or may have been disabled, making it difficult to navigate and use the computer. In such cases, knowing how to enable the touchpad from the Windows settings can be useful. In this blog post, we will discuss the steps to enable the touchpad from Windows settings.
Step 1: Open the Settings app
The first step is to open the Settings app on your computer. You can do this by clicking on the Windows icon on the bottom left corner of your screen and then clicking on the gear icon, which represents the Settings app.
Step 2: Click on Devices
In the Settings app, click on the “Devices” option. This will bring up a list of device-related settings.
Step 3: Select Touchpad from the left menu
In the Devices settings, click on the “Touchpad” option from the left menu. This will display the touchpad settings on the right side of the app.
Step 4: Toggle on Touchpad
Under the “Touchpad” settings, you will see a toggle under the “Touchpad” heading. If your touchpad is currently disabled, the toggle will be switched off. Simply click on the toggle to switch it on. This will enable your touchpad and allow you to use it.
Step 5: Adjust touchpad settings (optional)
If you want to customize your touchpad settings, you can do so from the same page. You can adjust options like sensitivity, scrolling, and tapping. You can also choose to ignore accidental touches and gestures on your touchpad. Play around with these settings to find what works best for you.
Step 6: Test the touchpad
Once you have enabled the touchpad and adjusted the settings, you can test it by moving your finger across the touchpad. If it is working properly and as per your desired settings, you should be able to navigate and click on items using the touchpad.
In case your touchpad is still not working, you can try restarting your computer or updating the touchpad drivers from the Device Manager. In some cases, the touchpad may be physically damaged, and you may need to get it repaired or replaced.
Enabling the touchpad from the Windows settings is a quick and easy process that can save you from the hassle of using an external mouse. By following the steps mentioned in this blog post, you can easily enable your touchpad and customize it as per your preferences.
2. Enable Touchpad via FN Shortcut
The touchpad on laptops is a convenient way to navigate through your computer without using a mouse. However, there are times when you may need to disable it, such as when using a separate mouse or to avoid accidentally moving the cursor while typing. Fortunately, most laptops have a shortcut key to easily enable or disable the touchpad.
On many laptops, the function (FN) key is used in conjunction with other keys to perform special functions. Many laptop manufacturers have designated specific keys to control the touchpad, making it easy to toggle its functionality on and off. To enable the touchpad on your laptop using the FN shortcut, follow these simple steps:
1. Locate the FN key on your keyboard. It is often located on the bottom left or right of the keyboard, near the CTRL and ALT keys.
2. Look for the function key with a touchpad icon on it. This may vary depending on your laptop’s brand and model. Some common keys with touchpad icons include F6, F7, F8, or F9.
If you are unsure which key to use, refer to your laptop’s user manual or search online for the specific function key for your laptop model.
3. Press and hold the FN key, and then press the designated touchpad key. This will enable or disable your touchpad.
4. Release the keys and try using your touchpad. If it’s still not working, repeat the same steps to disable and enable the touchpad.
If your laptop does not have a designated touchpad key, you can also try using the FN key in combination with the F5 key. This is a commonly used shortcut to enable or disable the touchpad.
In some cases, the touchpad may not be working due to a driver issue. If the above solutions do not work, try updating your touchpad drivers through the Device Manager. Go to “Start” and search for “Device Manager.” Expand the “Mice and other pointing devices” section, right-click on the touchpad device, and select “Update driver.”
In conclusion, many modern laptops have a convenient FN shortcut to enable or disable the touchpad, making it easy to navigate through your computer. If your touchpad is not working, try using the FN key with the designated touchpad key or the F5 key. If the issue persists, update your touchpad drivers through the Device Manager.
3. Enable Advanced Touchpad in BIOS
The touchpad has become an essential feature for laptops, allowing users to navigate and control their devices with ease. However, many laptop users are not aware of the advanced capabilities of their touchpads, which can greatly improve their productivity. In this blog post, we will guide you on how to enable advanced touchpad features in BIOS, so you can take full advantage of your touchpad.
Step 1: Access BIOS
The first step is to access the BIOS settings on your laptop. To do this, restart your laptop and continuously press the designated key (usually F2, F10, or Delete) to enter the BIOS setup utility. The key to enter BIOS may vary depending on your laptop brand, so make sure to look it up before restarting your laptop.
Step 2: Navigate to the “Advanced” Tab
Once you have entered the BIOS setup utility, you will see a menu with different tabs. Use the arrow keys on your keyboard to navigate to the “Advanced” tab. This tab may also be labeled as “Advanced Settings” or “Advanced Options.”
Step 3: Enable Touchpad Settings
Under the “Advanced” tab, look for a sub-menu that is related to the touchpad. The name of this sub-menu may vary depending on your laptop brand, but it usually contains the word “Touchpad” or “Pointing Device.” Select this sub-menu and press Enter.
Step 4: Enable Advanced Touchpad Features
Within the touchpad sub-menu, there will be options to enable or disable different touchpad features. Look for an option that says “Advanced Touchpad Features” or something similar. Enable this option by pressing the Enter key, and then select “Save and Exit” from the menu. This will save your changes and restart your laptop.
Step 5: Explore Advanced Touchpad Settings
Once your laptop has restarted, you can now use the advanced touchpad features that you have enabled in BIOS. Keep in mind that the options and settings may vary depending on your laptop brand and model. Some common advanced touchpad features include multi-finger gestures, palm detection, and scrolling speed adjustment.
In conclusion, by enabling advanced touchpad features in BIOS, you can enhance your touchpad experience and increase your productivity. Make sure to explore the different options and settings available to find the ones that work best for you. We hope this guide has been helpful in enabling advanced touchpad features on your laptop.
4. Update touchpad drivers
If you find that your touchpad is not functioning properly, it may be due to outdated drivers. Updating your touchpad drivers can often fix these issues and improve the performance of your touchpad. Here’s how you can easily update your touchpad drivers:
1. Open the Device Manager: Right-click on the Start button and select “Device Manager” from the menu.
2. Expand the “Mice and other pointing devices” section: In the Device Manager, find the section for “Mice and other pointing devices” and click on the arrow next to it to expand the list.
3. Right-click on your touchpad driver: Look for your touchpad driver in the list and right-click on it. Select “Update driver” from the drop-down menu.
4. Choose how you want to search for drivers: In the window that pops up, you will be given the option to automatically search for updated drivers or browse your computer for drivers. If you are connected to the internet, it is recommended to choose the automatic search option.
5. Wait for the update to complete: If an update is found, it will begin to download and install. This may take a few minutes, so be patient and do not disconnect from the internet.
6. Restart your computer: Once the update is complete, restart your computer to allow the changes to take effect.
7. Repeat for other touchpad drivers: If you have multiple touchpad drivers listed in the Device Manager, repeat the steps above for each one.
8. Check your touchpad settings: After updating your touchpad drivers, it is a good idea to check your touchpad settings to ensure they are configured correctly. You can access these settings by going to the Control Panel or Settings and searching for “touchpad.”
Updating your touchpad drivers can fix issues such as touchpad freezing, lag, or unresponsiveness. It can also improve the overall performance and functionality of your touchpad. Make sure to regularly check for updates to ensure your drivers are always up-to-date.
5. Enable touchpad gestures in Firefox (if applicable)
If you are someone who uses Firefox as your primary web browser, you might want to take advantage of the touchpad gestures feature to enhance your browsing experience. Touchpad gestures allow you to perform various actions with just a swipe or pinch on your laptop’s touchpad instead of using the keyboard or mouse. This can save you time and make browsing more intuitive and efficient. In this blog, we will guide you on how to enable touchpad gestures in Firefox if applicable.
Step 1: Check touchpad capabilities
Before you try to enable touchpad gestures, make sure that your laptop’s touchpad is capable of supporting such actions. You can check this by going to your laptop’s settings and looking for a touchpad or gesture option. If you can find it, then your touchpad supports gestures and you can proceed to the next step.
Step 2: Enable Firefox touchpad gestures
To enable touchpad gestures in Firefox, follow these steps:
1. Open Firefox and type about:config in the address bar. Press Enter to proceed.
2. You will see a warning message, click on “I accept the risk” to continue.
3. Type “gestures” in the search bar.
4. Look for the option named “dom.w3c_touch_events.enabled” and double-click on it to set its value to “true”.
5. Next, search for the option “browser.gesture.pinch.in” and double-click on it. In the input field, enter the value “cmd_fullZoomReduce”. Similarly, for the option “browser.gesture.pinch.out”, enter the value “cmd_fullZoomEnlarge”.
6. Save the changes by clicking on the “OK” button.
Step 3: Test the touchpad gestures
Now that you have enabled touchpad gestures in Firefox, you can test them out. For instance, you can use the pinch-to-zoom gesture to zoom in and out on a webpage. You can also use a three-finger swipe to go back or forward on a webpage. These gestures may vary based on your touchpad’s capabilities.
If the gestures do not work or stop working, you can go back to about:config and reset the values of the options you changed to their default settings by right-clicking on them and selecting “Reset”.
In conclusion, touchpad gestures can be a great addition to your browsing experience in Firefox. With just a few simple steps, you can enable them and start using them in your daily browsing. So, give it a try and see how it enhances your productivity.
In conclusion, touch gestures have become an integral part of our daily computing experience, making tasks more efficient and seamless. However, with the introduction of Windows 11, some users may experience issues with touch gestures not working. This can be frustrating, but with the help of troubleshooting methods such as updating drivers, adjusting touch settings, and performing a system reset, these issues can be resolved. It is important to keep in mind that touch gestures may vary depending on the device and its compatibility with Windows 11. By following the steps mentioned in this article, users can troubleshoot and fix touch gesture issues and continue enjoying a smooth and efficient touch-enabled experience on their Windows 11 devices.