NBA 2K20 has been widely popular among gamers, with its realistic gameplay and stunning visuals. However, many PC users have been experiencing crashes while playing the game, which is frustrating and can hinder the overall gaming experience. In this article, we will be discussing all the possible reasons for this issue and providing solutions to fix NBA 2K20 crashing on PC. Whether it’s due to hardware conflicts or software glitches, we have got you covered. So, if you are one of the many players struggling with this problem, read on to find out how to resolve it and get back to enjoying the game.
Table of Contents
How to Fix NBA 2K20 Crashing on PC?
NBA 2K20 is one of the most popular basketball simulation games, loved by fans all over the world. However, like many other games, it is not without its issues. One common issue that players have reported is the game crashing on PC. This can be frustrating, especially when you are in the middle of an intense game or about to complete a challenge.
If you are facing a similar issue, here are some solutions that may help fix NBA 2K20 crashing on PC.
1. Check if Your PC Meets the Minimum Requirements
The first step to fixing any game-related issue is to ensure that your PC meets the minimum requirements to run the game. NBA 2K20 requires at least 8GB of RAM, a dedicated graphics card, and updated drivers. If your PC falls short of these requirements, it may be the reason for the game crashing.
2. Update Graphics Drivers
Outdated graphics drivers can also result in game crashes. Make sure to update your graphics driver to the latest version and see if it resolves the issue. You can update your drivers through the device manager or by downloading the latest version from the manufacturer’s website.
3. Run the Game as an Administrator
Sometimes, NBA 2K20 may crash due to lack of permissions. To fix this, right-click on the game’s shortcut and select “Run as administrator.” You can also set the game to always run as an administrator by going to the game’s properties and selecting the “Compatibility” tab.
4. Disable Background Applications
Background applications can hog system resources, causing the game to crash. Close all unnecessary applications before starting the game and see if the crashes persist.
5. Verify Game Files
Sometimes, corrupt game files can also cause NBA 2K20 to crash. To fix this, verify the game files through the Steam client. Right-click on the game and select “Properties,” then go to the “Local Files” tab and choose “Verify Integrity of Game Files.” This process may take some time but can fix any corrupt files.
6. Lower Graphics Settings
If your PC is struggling to run the game, it may be helpful to lower the graphics settings. Lowering the resolution, turning off anti-aliasing, or reducing the texture quality can improve performance and prevent crashes.
7. Update the Game
Make sure to keep NBA 2K20 updated with the latest patches and fixes. These updates often include performance improvements and bug fixes that can help prevent crashes.
8. Reinstall the Game
If all else fails, you can try to reinstall the game. This will remove any corrupt files and provide a fresh installation of the game. Before doing this, make sure to back up your game saves.
In conclusion, NBA 2K20 crashes can be frustrating, but with these solutions, you can hopefully fix the issue and get back to enjoying the game. If the problem persists, you can reach out to the game’s support team for further assistance. Happy gaming!
What causes NBA 2k20 to Crash on PC?
NBA 2k20 is a popular basketball simulation game developed by 2K Sports. It is available on multiple platforms, including PC. However, like any other game, NBA 2k20 can sometimes crash on PC, leaving players frustrated and annoyed.
There can be several reasons that can cause NBA 2k20 to crash on PC. Let’s take a look at them:
1. Outdated Graphics Drivers
Graphics drivers are the most crucial element when it comes to gaming. They act as a bridge between the game and the hardware of your PC. If you have outdated or corrupt graphics drivers, it can lead to NBA 2k20 crashing on your PC. It is essential to keep your drivers updated to ensure smooth gameplay.
2. Incompatible Hardware or Software
If NBA 2k20 is not compatible with your PC’s hardware or software, it can cause the game to crash. Make sure to check the system requirements for the game before purchasing it. If your PC does not meet the minimum requirements, you may experience crashes or other performance issues.
Gaming can put a lot of strain on your PC’s hardware, causing it to heat up. If your PC overheats, it can lead to crashes, freeze-ups, and other issues. Make sure to keep your PC well-ventilated and in a cool environment while gaming. You can also use software like MSI Afterburner to monitor your PC’s temperature and adjust the fan speed accordingly.
4. Corrupted Game Files
Corrupted game files can also cause NBA 2k20 to crash. This can happen due to various reasons, such as incomplete downloads, improper installations, or malware. If you suspect that your game files are corrupted, try verifying the game files through the game launcher or re-installing the game.
5. Background Programs
Sometimes, background programs running on your PC can interfere with the game and cause it to crash. Close any unnecessary programs before launching NBA 2k20 and make sure to disable any antivirus or firewall temporarily.
6. Game Settings
If you have set the game settings too high for your PC to handle, it can cause NBA 2k20 to crash. Lower the graphical settings in the game and see if that makes a difference.
7. Server Issues
If you are playing the game in online mode, server issues can also cause crashes. Make sure to check the official Twitter account or support page of NBA 2k20 for any ongoing server maintenance or known issues.
NBA 2k20 may crash on your PC due to outdated drivers, incompatible hardware or software, overheating, corrupted game files, background programs, game settings, and server issues. Make sure to check these factors and try the possible solutions to prevent crashes while playing the game.
Pre-requisite: System Requirements
When it comes to using software or hardware, there are certain minimum requirements that must be met in order for it to function properly. These are known as system requirements, and they vary depending on the type of software or hardware being used. The purpose of system requirements is to ensure that users have a compatible system that can handle the software or hardware they wish to install.
Knowing the system requirements of a specific software or hardware is crucial as it helps users make informed decisions. Not meeting the minimum requirements could result in a poor user experience, crashes, or even the inability to use the product at all. In this article, we will discuss the importance of system requirements and how they can be found for different products.
Why are System Requirements important?
System requirements are important for several reasons. They ensure that users have a compatible system that can handle the product they wish to use. They also serve as a guide for users to determine if their system is powerful enough to handle the software or hardware. Meeting the minimum requirements will guarantee a smooth and stable performance of the product.
Another reason system requirements are important is that they dictate the cost of updating or upgrading a system. If a user finds that their current system does not meet the minimum requirements, they may need to invest in upgrades to make it compatible, which can be a costly process.
Where can I find System Requirements?
When purchasing software or hardware, the system requirements are usually listed on the product’s packaging or in the product description. It is essential to carefully review these requirements before making a purchase to avoid any issues in the future.
For software, system requirements can also be found on the manufacturer’s website or in the user manual. Some software may even have a feature that automatically checks if the system meets the minimum requirements before installation.
For hardware, system requirements can be found on the manufacturer’s website or in the product manual. It is essential to note that not all hardware is compatible with all systems, so it is crucial to check the system requirements before purchasing any hardware.
What are some common system requirements?
System requirements can vary greatly depending on the type of software or hardware being used. Some common system requirements include:
– Processor speed and type: This determines how fast and efficiently the software can run on the system. Different software may require different processor speeds or require a specific type of processor, such as Intel or AMD.
– RAM (Random Access Memory): This is the amount of memory the software needs to run smoothly. The more RAM a system has, the better it can handle complex tasks. Some software may have a minimum RAM requirement, while others may have a recommended amount for optimal performance.
– Storage space: This is the amount of free space needed on a hard drive or solid-state drive (SSD) to install the software. Some software may also require additional storage space for updates or temporary files.
– Operating System (OS): The software or hardware may require a specific operating system, such as Windows, macOS, or Linux, to function properly.
– Graphics Card: Some software, especially video games, may require a dedicated graphics card for optimal performance.
System requirements are an essential aspect to consider when purchasing and using software or hardware. By checking these requirements, users can ensure a smooth and stable performance of the product and avoid any compatibility issues. It is crucial to always check the system requirements before making a purchase and to keep them in mind when upgrading a system.
Solution 1: Installing the Latest Patch Available
Technology evolves at a rapid pace, and so do the vulnerabilities and bugs that come with it. Most software applications are regularly updated by their developers to fix these issues, and it’s crucial that users keep up with these updates to ensure their devices are secure and functioning correctly.
One major step in keeping your software up to date is installing the latest patch available. Patches are small pieces of code that are released by developers to fix known bugs or security issues in their software. They are like small band-aids that cover up the issue and keep the software functioning smoothly.
Here are some reasons why installing the latest patch is essential:
1. Security: Software vulnerabilities can make your device susceptible to cyber-attacks. Hackers can exploit these weaknesses to steal your personal information, infect your device with malware, or even take control of your device. Patches are designed to fix these vulnerabilities, making your software and device more secure.
2. Bug fixes: Software bugs can cause errors, crashes, or performance issues that can disrupt your work. Patches address these bugs, improving the overall functioning of the software. They also fix smaller issues that might not have been noticed by the developers during the initial release.
3. New features and improvements: Patches not only fix existing issues but also bring new features and improvements to the software. These updates can enhance the user experience, add new capabilities, and make the software more efficient.
Now that we understand the importance of installing the latest patch, let’s see how to do it:
1. Automatic updates: Most software programs have an automatic update feature that checks for new patches and installs them automatically. Make sure this feature is enabled in your settings to ensure you are always up to date.
2. Manual updates: If your software does not have an automatic update feature, you can manually check for updates in the settings or help menu of the software. In some cases, you might be prompted to update when there is a new patch available.
3. Check for updates regularly: Sometimes, patches might not be released automatically. It’s crucial to check for updates regularly, especially for essential software such as operating systems, antivirus, and web browsers. This will ensure your software is up to date and secure.
In conclusion, installing the latest patch available for your software is crucial for the security and smooth functioning of your device. Keep a regular check for updates and enable automatic updates whenever possible. It takes only a few minutes to update, but it can save you from a lot of potential problems in the long run. Stay safe and keep your software updated!
Solution 2: Verifying Game and Cache Files
One common issue that gamers encounter is game crashes or bugs while playing. Often, these issues can be resolved by verifying the game files and cache. This process essentially checks for any missing or corrupted game files and replaces them with the correct ones.
To verify game and cache files, follow these steps:
1. Open the game launcher or platform (such as Steam, Epic Games, etc.) and go to your game library.
2. Right-click on the game causing the issue and select “Properties.”
3. Look for an option that says “Verify integrity of game files” or “Verify game cache.” This option may be located under the “Local Files” tab or a similar location, depending on the platform.
4. Click on this option, and the verification process will begin. This may take a few minutes, depending on the size of the game and your internet speed.
5. Once the process is complete, the launcher or platform will inform you of any missing or corrupted files. It will then proceed to replace them with the correct ones.
6. After the process is finished, try launching the game again and see if the issue has been resolved.
Verifying game and cache files is a quick and easy solution that can fix various game issues. It is also a good idea to regularly verify game files to ensure that everything is running smoothly. If the problem persists, you can try other troubleshooting methods or reach out to the game’s technical support for further assistance.
Solution 3: Launching in Windowed mode
If you’re an avid gamer, you may have come across the term “Windowed mode” before. For those who are unfamiliar, Windowed mode allows you to play your game in a window on your computer screen, much like any other application. This can be useful for multitasking or if you have a smaller screen.
But did you know that launching your game in Windowed mode can also solve some common problems? In this blog post, we’ll explore how playing in Windowed mode can potentially fix issues with your game.
Firstly, launching your game in Windowed mode can help if you’re experiencing crashes or freezes. This is because fullscreen games can use up a lot of your computer’s resources, which can sometimes lead to crashes. By playing in a window, your game is not using up all of your computer’s resources and may lead to a smoother gameplay experience.
Secondly, if you’re experiencing issues with your game’s resolution, launching in Windowed mode can also be a good solution. Sometimes, games can have compatibility issues with certain screen resolutions, and playing in a window may eliminate these problems. Additionally, you can easily adjust the size of the window to fit your screen perfectly.
Another benefit of playing in Windowed mode is that it allows for easier access to other programs or applications on your computer. For example, if you need to quickly check your emails or respond to a message while playing your game, you can easily switch between the two without having to minimize the game.
So how can you launch your game in Windowed mode? The process may vary depending on the game you’re playing, but most games have an option in their settings to select Windowed mode. If you’re playing a game on Steam, you can right-click on the game in your library and go to “Properties” and then “General” to find the option to launch in Windowed mode.
If your game does not have an option to play in Windowed mode, you can try using a third-party software such as Borderless Gaming or ShiftWindow, which allows you to force any game to play in a borderless window.
In conclusion, playing your game in Windowed mode can be a simple solution to some common problems you may encounter while gaming. So next time you’re experiencing crashes or resolution issues, give Windowed mode a try and see if it helps. Happy gaming!
Solution 5: Checking for Windows Updates
Having an updated operating system is crucial for the functionality and security of your device. Windows regularly releases updates to fix bugs, improve performance, and enhance security. Thus, keeping your system up to date is essential for a smooth and safe computing experience.
However, sometimes users may encounter issues with updating their Windows, which can be frustrating. In this blog post, we will talk about how to check for Windows updates and fix any potential issues.
1. Manually Check for Updates
The first step is to manually check for updates by going to the Windows Settings. Here’s how:
– Click on the Start menu and select the “Settings” icon (a gear symbol).
– In the Settings menu, go to “Update & Security.”
– Click on “Windows Update” in the left sidebar.
– Click on “Check for updates” in the right pane, and Windows will automatically start searching for available updates.
2. Use the Windows Update Troubleshooter
If you’re facing issues with updating your Windows, you can use the built-in troubleshooter to fix the problem. Here’s how:
– Go to “Update & Security” in Windows Settings, as mentioned before.
– Click on “Troubleshoot” in the left sidebar.
– Scroll down and click on “Windows Update.”
– Click on “Run the troubleshooter,” and it will begin detecting and fixing any issues with Windows Update.
3. Check Your Internet Connection
Sometimes, slow or unstable internet connections can prevent your Windows from updating. Ensure that you have a stable internet connection and try updating again. You can also try using a wired connection if you’re experiencing issues with a Wi-Fi connection.
4. Restart Windows Update Services
If your Windows Update service is not running, you won’t be able to update your system. Here’s how to restart it:
– Press the Windows key + R to open the Run dialog box.
– Type “services.msc” and hit Enter.
– In the Services window, scroll down to “Windows Update” and right-click on it.
– Select “Restart,” and the service will be restarted.
5. Use Command Prompt
If the above methods didn’t work, you can try using Command Prompt to fix any issues with Windows Update. Here’s how:
– Press the Windows key + R to open the Run dialog box.
– Type “cmd” and press Ctrl + Shift + Enter to open Command Prompt as an administrator.
– In the Command Prompt window, type the following commands, pressing Enter after each one:
net stop bits
net stop wuauserv
net start bits
net start wuauserv
6. Check for Available Storage Space
If your device is low on storage space, you may face issues with updating your Windows. Make sure to have at least 20 GB of free space on your primary drive for updates to download and install. You can free up space by deleting unnecessary files or programs.
7. Update your Drivers
Outdated or faulty drivers can also interfere with the Windows update process. Make sure to update your drivers, especially those for your graphics card and network adapters. You can do so through Device Manager or by downloading the latest drivers from the manufacturer’s website.
In conclusion, regularly checking for Windows updates is crucial for the proper functioning and security of your device. If you’re facing issues with updating, try the solutions mentioned above to fix the problem.
Solution 6: Installing Microsoft Visual C++ 2015
If you are a Windows user, then you may have come across the need to install Microsoft Visual C++ 2015 on your computer. This is a programming language that is used to develop applications for Windows. However, sometimes you may encounter issues while installing it or using applications that require it. In this blog post, we will discuss some possible solutions that can help you install Microsoft Visual C++ 2015 successfully.
1. Check Compatibility:
Before you begin the installation process, make sure that your system meets the minimum requirements for the Microsoft Visual C++ 2015. It is recommended to have at least 1.5GB of RAM and 5GB of free disk space. Also, ensure that you have the latest updates for your Windows operating system.
2. Disable Anti-virus and Firewall:
Sometimes, anti-virus programs or firewalls can interfere with the installation process and prevent it from completing successfully. To avoid this, it is recommended to temporarily disable these programs and then try installing Microsoft Visual C++ 2015 again.
3. Run as Administrator:
If you are not logged in as an administrator, you may encounter issues while installing Microsoft Visual C++ 2015. To resolve this, right-click on the installation file and select “Run as administrator” from the context menu. This will ensure that the installation has all the necessary permissions to complete the process.
4. Clean Boot:
In some cases, third-party applications or services running in the background may also cause issues with the installation. To rule out this possibility, you can perform a clean boot by following these steps:
a. Press Windows + R keys, type “msconfig” and hit Enter.
b. In the System Configuration window, click on the “Services” tab, check the box next to “Hide all Microsoft services”, and then click “Disable all”.
c. Next, go to the “Startup” tab and click on “Open Task Manager”.
d. In Task Manager, right-click on each startup item and select “Disable”.
e. Once you have disabled all the services and startup items, restart your computer and try installing Microsoft Visual C++ 2015 again.
5. Use the Deployment Tool:
If the above solutions do not work, you can try using the Microsoft Visual C++ 2015 Deployment Tool. This tool allows you to customize the installation process and helps you troubleshoot any issues that may arise during the installation process.
6. Reinstall Microsoft Visual C++ 2015:
If none of the above solutions work, you can try reinstalling Microsoft Visual C++ 2015. To do this, uninstall it from the Control Panel and then download the latest version from the official Microsoft website and install it again.
In conclusion, the above solutions can help you successfully install Microsoft Visual C++ 2015 on your computer. If you continue to face issues, it is recommended to seek help from the Microsoft technical support team or consult a professional technician.
Solution 7: Updating Graphics Drivers
One common solution to technical issues with graphics is to update the graphics drivers. Graphics drivers are software programs that control and manage the interaction between your computer’s operating system and the graphics hardware. They are responsible for displaying graphics, videos, and other visual elements on your computer’s screen.
Over time, graphics drivers may become outdated or corrupted, which can lead to various issues such as crashes, freezes, and poor graphics performance. Updating your graphics drivers can solve these problems and ensure that your computer is running smoothly.
Here are the steps to update your graphics drivers:
1. Identify your graphics card: The first step is to identify the type of graphics card you have. You can do this by going to the Device Manager on a Windows computer or the System Information menu on a Mac.
2. Download the latest driver: Once you have identified your graphics card, visit the manufacturer’s website to download the latest driver. Make sure to download the correct driver for your specific card model and operating system.
3. Uninstall old drivers: Before installing the new driver, it is recommended to uninstall the old one. This can be done through the Device Manager on Windows or the System Information menu on a Mac.
4. Install the new driver: After uninstalling the old driver, run the downloaded driver installer to install the new driver. Follow the on-screen instructions to complete the installation.
5. Restart your computer: Once the installation is complete, restart your computer to apply the changes.
6. Check for updates: It’s a good practice to regularly check for updates for your graphics drivers. This can be done through the Device Manager on Windows or the System Information menu on a Mac.
In addition to these steps, you can also use third-party software such as Driver Booster or Driver Easy to automatically update your graphics drivers. These programs can scan your computer for outdated drivers and download the latest versions for you.
Updating your graphics drivers can often fix issues with graphics performance and stability. It’s also necessary to update your drivers when installing new hardware or software that may require different driver versions.
In conclusion, keeping your graphics drivers up to date is crucial for a smooth and optimal computing experience. By following the steps outlined above, you can easily update your graphics drivers and ensure that your computer’s graphics performance is at its best.
In conclusion, NBA 2K20 is an exciting and highly addictive game for basketball lovers. However, like any other game, it may encounter crashes and errors on PC. This can be due to various reasons such as outdated drivers, insufficient system requirements, or corrupted game files. By following the steps mentioned in this article, players can effectively fix NBA 2K20 crashing on PC and have a smoother gaming experience. It is important to regularly update drivers and keep the system requirements in check to avoid future crashes. With these troubleshooting tips, players can enjoy the game to its fullest potential without any interruptions.