All About Fix BSOD Stop Error 0X000000C5

All About Fix BSOD Stop Error 0X000000C5

The blue screen of death (BSOD) is a notorious error that computer users dread, as it often results in the loss of work and frustration. One particularly common and troublesome BSOD error is the Stop Error 0X000000C5, which can occur on various versions of Windows. This error can be caused by a variety of factors, making it difficult to diagnose and fix. In this article, we will delve into all the details about Fix BSOD Stop Error 0X000000C5, including its causes, common symptoms, and effective solutions. By understanding this error better, you will be better equipped to troubleshoot and resolve it, saving you from further headaches and computer crashes.

How to Fix BSOD Stop Error 0X000000C5

BSOD (Blue Screen of Death) is a common and dreaded error encountered by users running on the Windows operating system. It appears when the system crashes due to various reasons such as hardware failure, corrupted system files, or incompatible drivers. One such BSOD error is 0X000000C5, also known as the DRIVER_CORRUPTED_EXPOOL error. This error can cause your system to crash, leading to data loss and system instability. In this blog, we will discuss how to fix the BSOD Stop error 0X000000C5.

1. Update Drivers
The most common cause of the BSOD Stop error 0X000000C5 is outdated or corrupted drivers. To fix this, you need to update all the drivers on your system. You can update the drivers manually by going to the Device Manager and selecting the driver you want to update. Right-click on the driver and select the “Update driver” option. If you don’t have the time or the technical knowledge to update drivers manually, you can use a driver update software to automatically update all the drivers on your system.

2. Check for Hardware Issues
If updating drivers does not fix the error, the next step is to check if there are any hardware issues. Faulty hardware such as a damaged hard drive, faulty RAM, or a malfunctioning graphics card can cause the BSOD error 0X000000C5. You can run hardware diagnostic tests to check for any hardware issues. If any hardware is found to be faulty, replace it to fix the error.

3. Scan for Malware
Malware infection can also cause the BSOD error 0X000000C5. Malicious programs can corrupt system files, leading to this error. Hence, it is essential to run a full system scan using a reliable antivirus software to remove any malware from your system. Make sure to keep your antivirus software up-to-date to prevent future malware infections.

4. Check for System File Corruption
Corrupted system files can also cause the BSOD error 0X000000C5. To fix this, you can use the System File Checker tool. Open the Command Prompt as an administrator and type “sfc /scannow” and hit enter. This will scan your system for any corrupted system files and replace them with a cached copy.

5. Perform a System Restore
If the above methods do not work, you can try performing a system restore to a previous point when your system was functioning correctly. System restore helps to revert your system back to an earlier point in time, undoing any recent changes that may have caused the BSOD error.

BSOD Stop error 0X000000C5 can be frustrating and cause a lot of inconvenience. However, by following the above steps, you can fix this error and prevent it from occurring in the future. In addition, make sure to keep your system updated, and regularly run maintenance checks to prevent any system errors.

Checking the CPU temp

Keeping an eye on your CPU temperature is essential for the health and longevity of your computer. High temperatures can cause your CPU to overload and potentially damage your hardware. In this blog post, we will discuss the importance of checking your CPU temp and different ways to monitor it.

Why is it important to check CPU temp?

The CPU is the brain of your computer, responsible for processing instructions and carrying out tasks. A certain amount of heat is generated when your CPU is working, and it needs to be dissipated to prevent overheating. If your CPU gets too hot, it can affect your computer’s performance and cause system crashes. In extreme cases, it can even lead to permanent damage to your hardware.

Regularly checking your CPU temp can help you detect any potential overheating issues and take necessary actions to prevent damage to your computer.

How to check CPU temp?

There are several ways to check your CPU temp, and here are a few of the most common methods:


One of the most basic ways to check your CPU temperature is through your computer’s BIOS or UEFI settings. Restart your computer and enter the BIOS by pressing the designated key (usually Del, F2, or Esc) during the boot-up process. Look for a section called “Hardware Monitor” or “System Health” to view your CPU temperature.

Note: The temperature shown in the BIOS may not be accurate, as it only reflects the temperature at the time of boot-up and not during heavy usage.

2. Desktop Applications

There are also various software and desktop applications available that can monitor your CPU temperature in real-time. These applications usually display the temperature and other system information in the form of a widget on your desktop. Some popular options include Core Temp, HWMonitor, RealTemp, and Speccy.

3. Built-in Operating System Tools

Both Windows and Mac operating systems have built-in tools that can display your CPU temperature. In Windows, you can use Task Manager by right-clicking on the Taskbar and selecting “Task Manager” or by pressing Ctrl + Shift + Esc. Click on the Performance tab, and you should be able to see your CPU temperature under the CPU section.

In Mac, you can use the Activity Monitor by opening Spotlight Search (Command + Space) and typing “Activity Monitor.” Click on the CPU tab to view your CPU temperature.

4. Third-Party Software

There are also third-party software available, like SpeedFan or Open Hardware Monitor, that can monitor your CPU temperature along with other system components such as GPU, RAM, and hard drive.

Tips for CPU temperature management

Besides regularly monitoring your CPU temperature, here are some additional tips to help you manage it:

1. Keep your computer clean

Dust and debris can clog up the fans and vents in your computer, hindering proper air flow and causing your CPU to heat up. Make sure to regularly clean your computer using compressed air to prevent this from happening.

2. Use a cooling pad or fan

If you use a laptop, invest in a good cooling pad to prevent your CPU from overheating. For desktop computers, ensure that you have proper ventilation and invest in additional fans if necessary.

3. Update your drivers and software

Outdated drivers or software can cause your CPU to work harder, generating more heat. Make sure to regularly update them to keep your computer running smoothly and cool.

In conclusion, checking your CPU temperature is crucial to maintaining the health of your computer.

Uninstalling the 3rd party AV suite (if applicable)

Uninstalling the 3rd party AV suite (if applicable)

Installing third-party antivirus (AV) software on your computer can provide an extra layer of protection against viruses, malware, and other online threats. However, there are times when you may want to uninstall it for various reasons, such as switching to a different AV program or experiencing compatibility issues.

Uninstalling a third-party AV suite may seem like a simple task, but it’s important to follow the correct steps to do it effectively and avoid any potential problems. In this blog, I will discuss the steps to uninstall a third-party AV suite from your computer.

Step 1: Backup important data
Before you begin the uninstallation process, it’s important to backup any important data or files that may be stored in the AV suite. This is because some AV suites may not transfer or save your data during the uninstallation process. Therefore, it’s better to be safe than sorry and back up your important data.

Step 2: Close the AV suite
To initiate the uninstallation process, you need to close the AV suite first. This means completely exiting the program and making sure it is not running in the background. You can do this by right-clicking on the AV suite icon in the system tray and selecting “Exit” or “Close.”

Step 3: Uninstall from Control Panel
Most third-party AV suites can be uninstalled through the Control Panel on your computer. To access the Control Panel, go to the Start menu and type “Control Panel” in the search bar. In the Control Panel, click on “Programs” and then “Programs and Features.” Here, you will see a list of all the installed programs on your computer. Select the AV suite you want to uninstall and click on “Uninstall” at the top of the list.

Step 4: Follow the uninstallation instructions
Once you click on “Uninstall,” a pop-up window will appear with instructions to guide you through the uninstallation process. Carefully follow these instructions, as they may vary depending on the AV suite you are uninstalling. You may be asked to confirm your decision to uninstall the program, enter your password, and answer some survey questions. Follow the prompts until the uninstallation is complete.

Step 5: Restart your computer
After the uninstallation process is complete, it’s a good idea to restart your computer to ensure that any leftover components are removed. This will also allow your computer to clear its cache and refresh system settings.

Step 6: Check for any leftover files or programs
Sometimes, even after following the above steps, there may be some leftover files or programs from the AV suite. You can use a file cleaner program or manually check your computer to remove any remaining traces of the AV suite.

Step 7: Install a different AV suite (if applicable)
If you are uninstalling the third-party AV suite to install a different one, make sure to download and install the new AV software before removing the old one. This will ensure that your computer remains protected against online threats throughout the process.

In conclusion, uninstalling a third-party AV suite may seem like a daunting task, but by following these simple steps, you can do it effectively. In case you face any issues or errors during the uninstallation process, reach out to the AV suite’s customer support for assistance. Remember to always have a reliable AV program installed on your computer for your safety and security.

Uninstalling Roxio Easy Creator or ATI Catalyst Install Manager (if applicable)

In this post, we will be discussing how to uninstall Roxio Easy Creator or ATI Catalyst Install Manager from your computer.

Roxio Easy Creator and ATI Catalyst Install Manager are two popular software programs used for creating and managing media files. Although these programs offer a wide range of features and functionalities, there are instances when you might want to uninstall them from your system. This could be due to various reasons, such as switching to a new program, compatibility issues, or simply freeing up space on your computer. Whatever the reason may be, the process of uninstalling these programs is fairly simple.

Uninstalling Roxio Easy Creator:

1. Close all open programs and applications on your computer.

2. Click on the “Start” button and go to “Control Panel.”

3. In the Control Panel, click on “Programs” and then select “Programs and Features.”

4. Look for Roxio Easy Creator in the list of installed programs and click on it.

5. Click on the “Uninstall” button above the list of programs.

6. Follow the on-screen instructions to complete the uninstallation process.

7. Once the uninstallation is complete, restart your computer to apply the changes.

Uninstalling ATI Catalyst Install Manager:

1. Close all open programs and applications on your computer.

2. Click on the “Start” button and go to “Control Panel.”

3. In the Control Panel, click on “Programs” and then select “Programs and Features.”

4. Look for ATI Catalyst Install Manager in the list of installed programs and click on it.

5. Click on the “Uninstall” button above the list of programs.

6. You will be prompted with a pop-up window asking if you want to uninstall the program, click “Yes” to proceed.

7. Follow the on-screen instructions to complete the uninstallation process.

8. Once the uninstallation is complete, restart your computer to apply the changes.

In some cases, the traditional method of uninstalling programs might not work. If you are unable to uninstall Roxio Easy Creator or ATI Catalyst Install Manager using the above steps, you can try using a third-party uninstaller tool. These tools can scan your system for any leftover files or registry entries and remove them.

In conclusion, these are the steps to uninstall Roxio Easy Creator or ATI Catalyst Install Manager from your computer. It is always recommended to double-check if you still need these programs before uninstalling them to avoid any inconvenience in the future. We hope this guide was helpful and you were able to successfully uninstall these programs from your system.

Doing a Clean boot

Doing a clean boot is a troubleshooting process that helps identify and resolve software conflicts and system errors on your computer. It involves starting the computer with only the essential applications and services running, which eliminates potential sources of issues and allows you to pinpoint the root cause of any problems.

Here’s how you can do a clean boot on Windows computers:

Step 1: Open the System Configuration utility
Click on the Start button and type “msconfig” in the search bar. Press Enter to open the System Configuration window.

Step 2: Access the Services tab
In the System Configuration window, click on the Services tab. Check the box next to “Hide all Microsoft services” to prevent any essential system services from being disabled.

Step 3: Disable all services
Click on the “Disable all” button. This will disable all non-Microsoft services on your computer, which may be causing conflicts or errors.

Step 4: Access the Startup tab
Switch to the Startup tab in the System Configuration window. Here, click on the “Open Task Manager” link.

Step 5: Disable all startup items
In the Task Manager, right-click on each startup item and select “Disable.” This will prevent all non-essential applications from running at startup.

Step 6: Close Task Manager and apply changes
Close the Task Manager and go back to the System Configuration window. Click on “Apply” and then “OK” to apply the changes. You will be prompted to restart your computer to complete the process.

Step 7: Start the computer in clean boot mode
Once your computer restarts, it will be in clean boot mode. Only the essential services and applications required for the system to function will be running. If the error or issue is resolved in this mode, it means that one of the disabled services or startup items was causing the problem.

Step 8: Enable services and startup items
To determine which service or startup item is causing the problem, enable them one by one and restart your computer after each change. If the issue reappears, you can narrow down the culprit and take the necessary steps to fix it.

Step 9: Reset your computer to normal startup mode
Once you have identified and fixed the problem, you can reset your computer to its normal startup mode. Open the System Configuration window again and click on the “Normal startup” option under the General tab. Click on “Apply” and then “OK” to save the changes. You will need to restart your computer for the changes to take effect.

Performing a clean boot can help resolve various issues, such as slow performance, errors, and crashes on your computer. It is a useful troubleshooting step that can save you time and effort in identifying and fixing problems. However, it is essential to remember to reverse the changes and restart your computer in normal mode once you have completed the troubleshooting process.

Disable Overclocking (if applicable)

Disable Overclocking (if applicable)

Overclocking is a process of pushing the computer’s hardware beyond its factory settings to achieve higher performance. While it may seem appealing to some users, especially to gamers and enthusiasts, it can also have some negative effects on the hardware, including overheating and instability. For this reason, disabling overclocking may be necessary in certain situations.

Here are a few reasons why you may want to disable overclocking on your computer:

1. Stability issues: Overclocking can push the hardware to its limits, resulting in instability and crashes. If you notice that your computer is experiencing frequent crashes or freezes, it could be due to an unstable overclock. Disabling overclocking can help to resolve these issues.

2. Overheating: Overclocking can generate more heat, which can put excessive stress on the hardware components. This can lead to overheating, which can degrade the performance and lifespan of your computer. If you notice that your computer is running hotter than usual, it could be because of overclocking. Disabling it can help to keep the temperatures under control.

3. Compatibility issues: Overclocking may not work for all hardware components. It can cause compatibility issues, especially with older or weaker components. If you have recently upgraded your hardware and are experiencing stability or performance issues, disabling overclocking might help.

4. Warranty concerns: Most computer warranties do not cover damages caused by overclocking. If you have overclocked your computer and experience hardware failure, your warranty may become void. In such cases, disabling overclocking can protect your warranty and save you from any potential repair costs.

Now that we have discussed the reasons why you may want to disable overclocking, here’s how you can do it:

1. BIOS settings: Overclocking can be done through the BIOS settings on your computer. To disable it, you will need to enter the BIOS setup by pressing a specific key before your operating system boots up (usually F2 or Del key). Look for an option related to overclocking and set it to “Disabled”. Save the changes and exit.

2. Overclocking software: Many users use third-party overclocking software to push their hardware beyond its limits. You can also use the same software to disable overclocking. Open the software and look for an option to reset or disable overclocking settings.

3. Reset to default: If you have manually overclocked specific components such as CPU or GPU, you can reset them to their default settings. This can be done through the BIOS or the overclocking software.

4. Consult with a professional: If you are not familiar with overclocking or do not feel comfortable doing it yourself, it is recommended to consult with a professional. They can help you disable any existing overclocks and ensure that your hardware is running at safe and stable settings.

In conclusion, overclocking can provide a performance boost, but it also comes with risks. Disabling it can help to ensure the longevity and stability of your computer. If you are experiencing any issues with your computer, consider disabling overclocking as a troubleshooting step.

Installing KB4012598 Windows Update (if applicable)

If you are a Windows user, you might have come across the term “KB4012598” while installing updates for your operating system. This is a security update that was released by Microsoft on April 11, 2017, for various versions of Windows, including Windows 7, 8.1, and 10. In this blog post, we will discuss everything you need to know about installing KB4012598 Windows Update.

What is KB4012598 Windows Update?

KB4012598 is a cumulative security update that fixes several vulnerabilities in the Windows operating system. These vulnerabilities could potentially allow attackers to gain unauthorized access to your system and steal sensitive information.

The update addresses issues in several Windows components, including Internet Explorer, Microsoft Edge, Microsoft Graphics Component, Windows Hyper-V, and more. It also contains security updates for Microsoft Office, Adobe Flash Player, and other third-party components that are installed on your system.

Why is it important?

In today’s digital world, where cyber threats are becoming more sophisticated, it is crucial to keep your system updated with the latest security patches. The KB4012598 update addresses critical security vulnerabilities that could compromise the security of your system. Installing this update will ensure that your system has the latest protection against potential cyber attacks.

How to install KB4012598 Windows Update?

KB4012598 is an optional update, which means it is not automatically installed on your system. However, it is recommended to install this update to enhance the security of your system. Here are the steps to install KB4012598 on your Windows system:

Step 1: Open the Windows Settings menu by clicking on the Start button and selecting the gear icon.

Step 2: Click on “Update & Security.”

Step 3: In the Windows Update section, click on “Check for updates.”

Step 4: If KB4012598 is available, it will be listed under “Optional updates.” Click on “Download and install” to begin the installation process.

Step 5: Once the installation is complete, you may be prompted to restart your system.

Note: If you do not see KB4012598 in the list of available updates, it could be because your system is already up to date. However, if you want to install this update, you can manually download it from the Microsoft Update Catalog website.

Final Thoughts

Installing KB4012598 Windows Update is a crucial step in securing your system against potential cyber attacks. It is recommended to regularly check for updates and install them to keep your system up to date. In addition to security updates, Windows updates also include bug fixes and new features that can improve your overall user experience. We hope this blog post has helped you understand how to install KB4012598 Windows Update. Stay safe and keep your system updated!

Reinstall Mouse & Keyboard Drivers

If your mouse or keyboard is not working properly, one of the possible solutions is to reinstall the drivers. Drivers are software programs that allow your computer to communicate with and use hardware devices, such as a mouse or keyboard.

In this article, we will discuss how to reinstall mouse and keyboard drivers on your Windows computer.

Step 1: Determine the Model of Your Mouse and Keyboard

Before you can reinstall the drivers, you need to know the model of your mouse and keyboard. You can usually find the model number on the bottom of the device or on the packaging it came in. If you are unable to find the model number, you can also do a quick Google search using the brand and type of your device to find the correct model.

Step 2: Uninstall the Drivers

To uninstall the drivers, follow these steps:

1. Open the Device Manager by right-clicking on the Start button and selecting “Device Manager.”

2. Expand the “Mice and other pointing devices” and “Keyboards” categories by clicking on the arrow next to them.

3. Right-click on the mouse or keyboard device and select “Uninstall device.”

4. A pop-up window will appear asking you to confirm the uninstallation. Click “Uninstall” again.

5. Repeat this process for all the mouse and keyboard devices listed in the Device Manager.

Step 3: Download and Install the Latest Drivers

1. Visit the website of the manufacturer of your mouse and keyboard.

2. Look for the support or downloads section on the website and search for the latest drivers for your model.

3. Once you have found the correct drivers, download them and save them to a location on your computer.

4. Double-click on the downloaded file to start the installation process.

5. Follow the instructions provided by the installation wizard to install the new drivers.

6. Once the installation is complete, restart your computer.

Step 4: Test the Mouse and Keyboard

After your computer has restarted, test the mouse and keyboard to see if they are working properly. If they still do not work, try connecting them to a different USB port on your computer.

If your mouse and keyboard still do not work, there may be a hardware issue with the devices themselves. In this case, you may need to replace them.


Reinstalling mouse and keyboard drivers can help fix issues with these devices not working properly on your computer. By following the steps outlined in this article, you can easily uninstall and reinstall the drivers to get your mouse and keyboard working again.


In conclusion, BSOD stop error 0x000000C5 can be a frustrating and disruptive issue for any computer user. However, through understanding the causes, symptoms, and potential fixes discussed in this article, it is possible to effectively troubleshoot and resolve this error. Whether it is updating drivers, running system scans, or performing a clean boot, there are various methods to try in order to fix the BSOD stop error. By following these steps and seeking professional help if needed, users can overcome this issue and prevent it from occurring in the future. Remember to always back up important data and regularly maintain your computer to avoid encountering such errors. With the right knowledge and steps, BSOD stop error 0x000000C5 can

Leave a Reply

Your email address will not be published. Required fields are marked *