Fix: XBOX One S wont Start

Fix: XBOX One S wont Start

As one of the most popular gaming consoles in the market, the Xbox One S has gained a massive following of loyal fans. However, even the most reliable technology can face issues, and one of the most frustrating problems that Xbox One S users may encounter is the inability to start the console. This issue can be caused by a variety of factors, and it can be frustrating for gamers who are eager to jump into their favorite games. In this article, we will explore the potential causes and solutions for the Xbox One S not starting, so you can get back to gaming in no time.

Reset Internal Power Supply

Reset Internal Power Supply

Internal power supply plays important role to handle voltage and power flow inside a computer system. It is a crucial component that helps to regulate and distribute power to various hardware components, such as the processor, motherboard, and storage devices.

The internal power supply, also known as the PSU (Power Supply Unit), is responsible for converting the AC power from the wall outlet into DC power that is suitable for the computer’s internal components. It provides the necessary voltage and current to ensure the stable and efficient operation of the computer.

In some cases, you may need to reset the internal power supply to troubleshoot certain issues with your computer. This can be a little tricky, as it involves working with electronic components and opening up your computer’s case. However, with proper precautions, you can easily reset the internal power supply of your computer.

Before attempting to reset the internal power supply, it is important to take safety precautions. Make sure to unplug your computer from the power source and wait for at least 10-15 minutes for the capacitors to discharge before opening the case. You should also wear an anti-static wrist strap to prevent any electrical discharge that could damage your components.

Once you have taken the necessary precautions, you can begin the process of resetting the internal power supply. Here’s how you can do it:

1. Disconnect all power cables from the power supply, including the 24-pin motherboard power cable, 4/8-pin CPU power cable, and any other power cables connected to your components.

2. Locate the PSU switch at the back of your computer and turn it off. In some cases, there may not be a physical switch, and you may need to unplug the power cord from the back of the PSU.

3. Press and hold the power button on your computer for 10-15 seconds to discharge any remaining power in the system.

4. Open your computer’s case and locate the internal power supply. It is usually located at the top or bottom of the case and is attached to the back panel with a few screws.

5. Carefully remove the power supply from the case and locate the small button or switch on the back of the PSU. This is the CMOS reset button or switch.

6. Press and hold the CMOS reset button/switch for 10-15 seconds to discharge any residual power from the internal power supply.

7. Release the button/switch and reattach the power supply to your computer. Make sure to securely fasten it to the back panel with the screws.

8. Reconnect all the power cables to their respective components.

9. Close the computer case and plug in the power cord.

10. Turn on the PSU switch and then press the power button on your computer to boot it up.

Resetting the internal power supply can help resolve issues such as computer not powering on, frequent shutdowns, or hardware malfunctions. However, if the issue persists, it may indicate a faulty power supply that needs to be replaced.

In conclusion, the internal power supply is a critical component in a computer system, and resetting it can help troubleshoot certain issues. It is important to take proper precautions and follow the steps carefully to avoid any damage to your computer or its components. If you are uncomfortable with handling electronic components, it is best to seek professional help.

Check Your Power Cable

Check Your Power Cable

One of the most common issues faced by tech users is a faulty power cable. Whether it is for your laptop, phone, or any other electronic device, a malfunctioning power cable can be a major inconvenience. As a tech blogger, it is important to educate your readers about how to check their power cable to ensure uninterrupted usage of their devices. Here are a few simple steps to guide your readers in checking their power cable.

1. Check for Physical Damage

The first and most obvious step is to check for any physical damage on the power cable. This could include cuts, tears, or exposed wires. If you see any of these signs, it is important to replace the cable immediately to avoid any potential safety hazards. Physical damage can occur due to wear and tear or pets chewing on the cables, so it is important to regularly inspect them.

2. Wiggle the Cable

If there is no visible physical damage, the next step is to wiggle the cable while it is connected to the device. Sometimes, the cable may not be properly connected to the device, causing it to lose power intermittently. By wiggling the cable, you can check for loose connections or faulty ports. If the device loses power while wiggling the cable, it is time to replace it.

3. Test with a Different Device

To further narrow down the issue, your readers can try using the power cable with a different device. If the cable works on another device, then the problem lies with the original device. On the other hand, if the cable does not work with any device, then it most likely needs to be replaced.

4. Use a Multimeter

A multimeter is a handy tool that can help your readers check the connectivity and voltage of their power cable. By connecting the two ends of the multimeter to the two ends of the cable, the reader can see if there is a complete circuit or if there is a break in the cable. This will give them a better idea of whether the cable is functional or not.

5. Check the Adapter

In some cases, the issue may not be with the power cable but with the adapter. If the cable shows no signs of damage and works with a different device, then it is possible that the adapter has malfunctioned. In this case, your readers can try using a different adapter to see if it solves the problem.

In conclusion, a faulty power cable can be a major inconvenience, but by following these simple steps, your readers can quickly identify the issue and take the necessary steps to resolve it. Remember to always prioritize safety and to replace any damaged cables immediately. By educating your readers about how to check their power cable, you will help them save time and money in the long run.

Conclusion

In conclusion, experiencing issues with your XBOX One S not starting can be frustrating, but there are several steps you can take to fix the problem. By trying troubleshoot solutions such as resetting the console, checking the power supply, or performing a factory reset, you can potentially resolve the issue and get your device up and running again. If these methods do not work, it is advised to contact Microsoft support for further assistance. Remember to always keep your console and games up to date to prevent future issues. Hopefully, with these tips, you can successfully fix your XBOX One S and get back to enjoying your gaming experience.

Leave a Reply

Your email address will not be published. Required fields are marked *