All About Fix Error 0x000000C2 on Windows

All About Fix Error 0x000000C2 on Windows

Windows operating system is one of the most widely used platforms across the world, providing users with a seamless and user-friendly experience. However, like any other software, Windows is not immune to errors and issues that can disrupt the smooth functioning of the system. One such error is 0x000000C2, which can cause frustration and inconvenience for users. In this article, we will delve deeper into what this error is, its possible causes and most importantly, how to fix it on your Windows device. So, if you have encountered this error or want to be prepared for any future occurrences, read on to learn all about fix error 0x000000C2 on Windows.

How to Fix Error 0x000000C2 on Windows?

Error 0x000000C2, also known as the “BAD_POOL_CALLER” error, is a common error on Windows that can occur for various reasons. It is usually accompanied by a blue screen of death (BSOD) and a message stating that your PC ran into a problem and needs to restart.

This error can be caused by hardware or software issues, such as faulty drivers, outdated software, or even a virus or malware infection. In this article, we will discuss some possible solutions to fix the Error 0x000000C2 on Windows.

Solution 1: Run a Full System Scan for Malware

As mentioned earlier, a virus or malware infection can also cause this error. It is essential to run a full system scan using your antivirus software to check for any malicious programs that may be causing the issue. If any malware is detected, remove it immediately and restart your PC to see if the error persists.

Solution 2: Check for Hardware Issues

Sometimes, faulty hardware can also be the cause of Error 0x000000C2. If you have recently installed any new hardware, such as RAM, graphics card, or hard drive, try removing it and see if the error persists.

If you do not have any new hardware, then check your existing hardware for any issues. You can run a hardware diagnostic tool to check for any errors. If you find any faulty hardware, replace it and see if that resolves the issue.

Solution 3: Update Drivers

Outdated or incompatible drivers can also cause the Error 0x000000C2. It is essential to keep your drivers updated to avoid any compatibility issues. You can manually update your drivers by going to the manufacturer’s website and downloading the latest version.

Alternatively, you can use a driver update tool, such as Driver Booster or Driver Easy, to scan your system for outdated drivers and automatically update them.

Solution 4: System Restore

If you have recently made any changes to your system, such as installing new software or updating drivers, and that resulted in the Error 0x000000C2, you can try doing a system restore to undo those changes.

To do a system restore, go to the Control Panel and click on “Recovery.” From there, click on “Open System Restore” and follow the instructions to restore your system to an earlier point in time.

Solution 5: Reset Windows 10

If none of the above solutions work, you can try resetting your Windows 10 computer. This will reinstall Windows and remove any conflicting software or files that may be causing the Error 0x000000C2.

To reset your Windows 10 computer, go to the Start menu and click on “Settings.” From there, go to “Update & Security” and click on “Recovery.” Under “Reset this PC,” click on “Get started” and follow the instructions to reset your computer.

Solution 6: Clean Windows Registry

Corrupted or invalid entries in the Windows registry can also cause the Error 0x000000C2. It is essential to regularly clean your registry to avoid any errors. You can use a registry cleaner tool like CCleaner to scan and clean your registry.

Solution 7: Reinstalling Windows

If all else fails, you may need to reinstall Windows to fix the Error 0x000000C2. Reinstalling Windows will remove all your files and programs, so make sure to back up

What is causing 0x000000c2 Stop Error Code?

A 0x000000c2 stop error code, also known as a Blue Screen of Death (BSOD) or a STOP code, is a critical system error that occurs in Microsoft Windows operating systems. This error can occur on any version of Windows, including Windows 10, 8, 7, Vista, or XP.

There are several possible causes for a 0x000000c2 stop error code, including hardware failures, driver issues, and software compatibility problems. Let’s dive deeper into each of these potential causes:

1. Hardware failures: In some cases, the 0x000000c2 stop error code can be caused by a hardware failure, such as a faulty hard drive, memory module, or processor. These types of hardware failures can occur due to age, wear and tear, or improper installation.

2. Driver issues: Device drivers are essential software programs that help your computer communicate with hardware devices. If a driver is outdated, corrupted, or incompatible with your operating system, it can cause a 0x000000c2 stop error code.

3. Software compatibility problems: Some software programs, especially those that require extensive system resources, can conflict with your operating system or other programs, leading to a 0x000000c2 stop error code. This can happen if the software is not properly designed or is not compatible with your hardware or other installed programs.

To fix a 0x000000c2 stop error code, you can try the following solutions:

1. Check hardware for failures: If you suspect that a hardware failure is causing the 0x000000c2 stop error code, try running diagnostic tests on your hard drive, memory, and other components to identify any potential issues. If you find any problems, you may need to replace the faulty hardware.

2. Update or reinstall drivers: If a driver issue is causing the 0x000000c2 stop error code, try updating your drivers to the latest versions. You can do this through Device Manager or by downloading the latest drivers from the manufacturer’s website. If updating the driver does not work, you may need to uninstall and reinstall it.

3. Check for software conflicts: To troubleshoot software compatibility issues, try uninstalling any recently installed programs or updates that may be causing the problem. You can also try running your computer in safe mode to see if the error persists. If the error does not occur in safe mode, it is likely that a software conflict is causing the issue.

4. Run System File Checker (SFC) and DISM: SFC and DISM are built-in troubleshooting tools in Windows that can help fix system file errors and corruption. To run SFC, open the command prompt as an administrator and type “sfc /scannow” without the quotes. To run DISM, type “DISM /Online /Cleanup-Image /RestoreHealth” (without the quotes) in the command prompt.

5. Perform a clean boot: A clean boot is a troubleshooting technique that helps identify conflicts between software programs. To perform a clean boot, disable all non-Microsoft services and startup items and then gradually enable them to identify the culprit.

In some cases, a 0x000000c2 stop error code may also be caused by malware or a virus. Therefore, it is important to regularly run antivirus scans and ensure that your operating system and security software are up to date.

In conclusion, a 0


In conclusion, error 0x000000C2 is a common and frustrating issue for Windows users, but with the proper understanding and troubleshooting methods, it can be easily resolved. By following the steps mentioned in this article, users can effectively diagnose and fix this error, preventing any further disruptions in their computer system. It is always advisable to keep your Windows system up to date and consult professional help if needed. With the right approach, fixing error 0x000000C2 can become a simple task, ensuring a smoother and more efficient functioning of your Windows system.

Leave a Reply

Your email address will not be published. Required fields are marked *